Description:

Anti static mat rubber roll material provides professional quality electro-static discharge (ESD) protection on your work bench .
This 2 layer rubber lamination - with a top (blue colored side) static dissipative layer and a bottom (black side) conductive layer may be cut to any size to create custom anti static bench mats for computer technicians or electronic assembly and repair ESD work stations.
 Compared to cheaper more rigid PVC anti static mats which like to stay curled, BT-W03 rubber mats are pliable, lay flat and conform, have a high tolerance of heat from solder irons, resistant to most solvents, and are much less prone to damage from mechanical impact.
To ground this mat material, users will need to install at least one (3/8" dia.) 10mm clinch snap near one corner on each mat, (or one snap at each 10 linear foot interval on longer continuous mats), and attach one end of a static mat ground cord to the installed snap and the other end of the cord to earth ground. (Snaps and ground cord not included).
ESD Mat is applied to workshops and advanced laboratories for microelectronic industries such as electronic semi-conduct devices,electronic computers,electronic communications equipment and integrated circuits etc.
ESD Mat are mainly made of antistatic(conductive) and static-dissipative materials,and synthetic rubber.
The uper layer of static dissipation is about  thickness of  0.3-0.5mm .

The underlayer of electric conduction is about  thickness of 1.5-1.7mm

Specifications

Parameters of BT-W03 Rubber Anti Static Mat
Static Dissipation Layer (Top) Resistance to Groundable Point (RTG) 8x106-8Ω
Resistance Point to Point (RTT) 2x106-8Ω
Friction static voltage: < 100V
Conductive Layer (Bottom) Surface resistance: ≤ 10Ω
Friction static voltage: < 50V
Static decay time 5,000V to 50V < 1s

Package include:

1 X 300mm X 300mm  Blue Anti Static Mat